Disassembly method of toilet cover- Longsheng Artware Co.,Ltd

How can I replace the toilet cover when it is broken? The installation methods of different types of toilet covers are also different. Under normal circumstances, the bottom end of the toilet cover is connected to the toilet, and the back is screwed up with screws. As long as you reach down and find the screws on both sides, you can take down the whole cover. So what else can I do to remove and replace the toilet cover? Let's take a look at the following introduction.
Method 1 for changing the toilet cover: find the screw cap, remove it with a movable handle, and then replace it with a new one. The position of the screw cap of the toilet cover is difficult to find, some in the light and some in the dark. The screw cap in the dark, on the side of the toilet next to the water tank, open the cover. Reach in with your hand and touch it upward and towards the water tank. You should be able to touch it. You can't see it.

Method 2 for replacing the toilet cover: when replacing the toilet cover, only remove the fixing bolt at the back of the toilet to replace it; It can be operated in the opposite direction during installation. Most toilet covers are regardless of size. Just adjust two bolts during installation. However, it is also necessary to measure the size, screw hole distance, width and length of the toilet cover, and then buy a new toilet cover for replacement.

Method 3 for changing the toilet cover: if the toilet cover does not have to be changed, but some of it is broken, a small amount of repair can be carried out in less serious cases, and it can still be used to save money.